UTO Trade Terms And Conditions

1. Unit(s) will be road worthy, capable of operating as originally designed and passing all state and/or federal safety inspection requirements.
2. Must Have Current Federal D.O.T. inspection sticker.
3. Dents, body damage and/or rustdamage allowance will be $250 or less including damage to fuel tanks and bumpers.
4. No broken, cracked, or chipped glass will be accepted. All glass must meet D.O.T. requirements.
5. Interior must be in good condition. Accessories including radios, guages, lights, air conditioning, and controls must be as originally installed and in good working order.
6. All standard and optional equipment on or in truck chassis and body must be included and must be in a working order. Van and truck bodies which are not the same year as the truck must be specifically identified prior to trade allowance being developed. Refrigerated units need to be identified by manufacturer, year, model, and hours of usage.
7. Engine must pass a Dyno test for 75% of rated horsepower. Blow-by will conform to the manufacturer’s specifications for Caterpillar, Cummins, Detroit and other applicable OEM’s. Crankcase, manifold and fuel pressure must not exceed manufacturer’s specs. All electronic engines must have the password removed prior to turn-in. Additionally, original password must also be provided prior to turn-in.
8. All electronic engines must retain mileage information & may be used for mileage verification purposes.
9. No oil/grease leaks on engine or drive train.
10. Brake linings on all axles must be at least 9/32”.
11. Brake drums must be D.O.T. acceptable.
12. Batteries will start unit Electrical system to be fully operational.
13. All tires must be matched type by axle, all sizes on units must be same. Any tire size exceptions must be noted in original appraisal, and specifically approved. Must have minimum remaining tread depth of 9/32”. Measured at groove closest to centerline of each tire.No casings accepted that do not meet D.O.T. standards & requirements. No trailer tires.
14. No broken or cracked frames, springs, axle housings, and fifth wheels will be accepted.
15. Unit(s) will be de-identified (with heat gun, not scraper) before turn-in.Paint must NOT be damaged. Paint should be original or equivalent.
16. Must have negotiable Title and be free of liens.
17. Federal Highway Used Tax form # 2290 must have proof of current payment.