Icons

LT
Cascadia

Fleet Maintenance Checklist


These packages of 2019 & 2020 LT and 2019 Freightliner Cascadia trucks have been professionally maintained, continuously monitored and thoroughly inspected per the maintenance schedule below, which ensures you are purchasing a well-maintained vehicle.

Preventative Maintenance Records at Intervals Outlined and Noted Below

PREVENTATIVE MAINTENANCE GUIDELINES


Cooling System – 270 Days / 50,000 Miles

Change Oil & Grease – 270 Days / 50,000 Miles

R&R HVAC Filter – 540 Days / 100,000 Miles

R&R Cabin Filter – 810 Days / 150,000 Miles

R&R Power Steer Fltr – 1,350 Days / 250,000 Miles

DEF Filter Service – 1,350 Days / 250,000 Miles

Tire and Light Inspection Procedure – 30 Days


WALK AROUND & INTERIOR INSPECTIONS – 270 DAYS / 50,000 MILES

UNDER TRUCK INSPECTION – 270 DAYS / 50,000 MILES


  • Inspect rear springs, shackles, airbags and assemblies, shocks, torque arms, bushings, equalizers, axle wheel seals for leaks, slack adjusters, brake linings, drums, S-cams bushings, U-bolts, cross members, all air hoses, valves, and brake chambers for leaks, chaffing, and securement, differentials for leaks, breather condition, fluid levels, drive lines, U-joints, and carrier bearing for end play, fuel tanks, mounts, valves and all fuel lines, DEF tank, fuel tank, mounts, valves, DEF lines, fuel pump, lines, wiring, aftertreatment device assembly for any leaks and dents, securement, discoloration, or soot, transmissions for leaks and fluid level, condition of tanks, brackets, mounts, pull cables, air dryer, water / oil mixture in blowby tube or crankcase breather, oil pan gasket, front and rear crankshaft seals for leaks, engine mounts for deterioration and looseness, front suspension, including shocks, spring shackles, bolts, and bushings, torque transmission fill plugs

 

LUBE BAY – 270 DAYS / 50,000 MILES


  • Change oil and replace oil filter
  • Inspect 5th wheel for damage, grease and adjust jaws, lubricate air cylinder
  • Inspect steer axle hub oil level, lube condition, and for leaks.
  • Grease steering column, steering gear box, kingpins, spring shackles, tie rod ends, drag link, pitman arm, u-joints until bearing caps purge, s-cams, slack adjusters and throw-out bearing.

 

UNDER HOOD AND TIRE INSPECTION – 270 DAYS / 50,000 MILES


  • Replace fuel filter and prime system.
  • Inspect operation of fuel / water separator, cooling system, coolant hoses for chaffing, clutch reservoir fluid level, HVAC hoses, lines, compressor, condenser, and mounting brackets, starter and alternator connections, cable routing and securement, radiator core, water pump, fan hub, belt condition, and belt tensioner, air filter restriction gauge, exhaust system, turbo wastegate, variable nozzle turbine (VNT) actuator, and linkage, battery box, hold downs, door latches, kick plate magnets, mounts, cable connections, disconnect switch, and fuse junction block, battery date code and cable connections
  • Check coolant level and freeze protection with refractometer, tire air pressure and tread depth, all
    fluids and fluid levels under the hood
  • Check tires and torque lug nuts
International Used Truck Center 41.776180, -88.200918.